Products

– IPPL2

IPPL2

IPPL2 model Industrial Positive Pressure is a double wall stainless steel chimney with 2″ mineral fiber insulation. This chimney is UL listed for positive pressure applications up to 60″ water column.

Documents

Catalogue

Specifications

Installation instruction

Data sheets

No applicable data sheet.

Features

Inner wall: 316L or 304 2B stainless steel (20 ga – 6” (152 mm) to 40” (1016 mm) diameter; 18 ga – 42” (1067 mm) to 48” (1219 mm) diameter).
Outer wall: 301, 430, 316L, 304 2B stailess steel or galvalume (24 ga – 6” (152 mm) diameter; 20 ga – 42” (1067 mm) to 48” (1219 mm) diameter).
Continuous laser welding
Full range of accessories including elbows, fittings, guides and supports.

Weights and Clearances

IPPL2						LINEAR WIEGHT
I.D		O.D		AREA		IPPL2
in	mm	in	mm	in2	mm2	lb/ft	kg/m
6	152	10	254	28	18.2	8.8	13.1
8	203	12	305	50	32.4	11	16.4
10	254	14	356	79	50.7	13.3	19.8
12	305	16	406	113	73	15.6	23.2
14	356	18	457	154	99.3	17.8	26.5
16	406	20	508	201	129.7	20.1	29.9
18	457	22	559	254	164.2	22.4	33.3
20	508	24	610	314	202.7	24.6	36.6
22	559	26	660	380	245.2	26.9	40
24	610	28	711	452	291.9	29.2	43.4
26	660	30	762	531	342.5	31.4	46.7
28	711	32	813	616	397.3	33.7	50.1
30	762	34	864	707	456	36	53.6
32	813	36	914	804	518.9	38.2	56.8
34	864	38	965	908	585.8	40.5	60.3
36	914	40	1016	1018	656.7	42.8	63.7
38	965	42	1067	1134	731.7	45	67
40	1016	44	1118	1257	810.7	47.3	70.4
42	1067	46	1168	1385	893.8	49.6	73.8
44	1118	48	1219	1521	981	51.8	77.1
46	1168	50	1270	1662	1072.2	54.1	30.5
48	1219	52	1320	1810	1167.5	56.4	83.9

MINIMUM CLEARANCE AIR SPACE TO COMBUSTIBLE CONSTRUCTION
MODEL IPPL2
Inside diameter	Clearance
(1000ºF)	(1000ºF et 1400ºF)
6'' to 12''	1''
14''	1.5"
16'' to 18''	2"
20'' to 22''	3''
24'' to 26''	4''
28'' to 32''	5''
34'' to 36''	6''
38'' to 40''	7''
42'' to 48''	8''

Listing

CHEMINEE LINING.E inc. venting systems models IPPL, IPPL2, IPPL2F and IPPL4F are listed by Underwriters Laboratories, inc. (UL) under file MH26661 and tested in accordance with UL 103 Standard for Factory-Built Chimneys for Residential Type and Building Heating Appliances and the Canadian Standard for 540°C (1000°F) and 760°C (1400°F) industrial Chimneys CAN/ULC-C959. These models are also suitable for use in positive pressure applications up to 60” water column. Listings include the following chimney product categories and diameters.

UL 103 & CAN/ULC C-959

Models IPPL • IPPL2 • IPPL2F • IPPL4F	Temperature	Diameter
Building Heating Appliance Type Chimney	1000°F continuous	6" to 48" ID
1400°F Chimney (Models IPPL, IPPL2F and IPPL4F only)	1400°F continuous	6" to 48" ID

Applications

Building Heating Appliance Chimney Listing (1000°F Chimney Listing) – under this category, models IPPL, IPPL2, IPPL2F and IPPL4F, have been determined suitable for venting flue gases at a temperature not exceeding 540°C (1000°F) under continuous operating conditions, from gas, liquid, oil or solid fuel fired appliances.
Building Heating Appliance Chimneys are suitable for use with Building Heating Appliances and Low Heat Appliances as described in the Chimney Selection Chart of National Fire Protection Association (NFPA) Standard No. 211.
1400°F Chimney Listing – under this category, models IPPL, IPPL2F and IPPL4F, have been determined suitable for venting flue gases at a temperature not exceeding 760°C (1400°F) under continuous operating conditions. As such, they are suitable for use with ovens and furnaces as described in the Chimney Selection Chart of NFPA No. 211, in addition to other applications.

Criteria	Grease Duct	Restaurant BHA Chimney	1400°F Chimney
Application	Cooking Appliances, Ventilation Hoods, Restaurant Grease Ducts & Pizza Oven Exhausts	Low and High Pressure Steam Boilers, Diesel and Turbine, Exhausts & Building Heating Equipment	Industrial furnaces, Processing Equipment, Kilns and Ovens, Incinerator, Coffee Roaster & Diesel and Turbine Exhaust
Continuous operating temperature	500°F	1000°F	1400°F
IPPL	Yes	Yes	Yes
IPPL2	N/A	Yes	N/A
IPPL2F	Yes	Yes	Yes
IPPL4F	N/A	Yes	Yes