Guides

 

Wall Guide (WG)

Used as a guide and to allow for expansion of the grease duct or conduit. It may be used either horizontally or vertically. The oblique braces (not included) may be attached above or below the guide plate.
Includes: 4 - Wall brackets

I.D. A B
in mm in mm in mm
6 152 10.250 260 14.000 356
8 203 12.250 311 16.000 406
10 254 14.250 362 18.000 457
12 305 16.250 413 20.000 508
14 356 18.250 464 22.000 559
16 406 20.250 514 24.000 610
18 457 22.250 565 26.000 660
20 508 24.250 616 28.000 711
22 559 26.250 667 30.000 762
24 610 28.250 718 32.000 813
26 660 30.250 768 34.000 864
28 711 32.250 819 36.000 914
30 762 34.250 870 38.000 965
32 813 36.250 921 40.000 1016
34 864 38.250 972 42.000 1067
36 914 40.250 1022 44.000 1118
38 965 42.250 1073 46.000 1168
40 1016 44.250 1124 48.000 1219
42 1067 46.250 1175 50.000 1270
44 1118 48.250 1226 52.000 1321
46 1168 50.250 1276 54.000 1372
48 1219 52.250 1327 56.000 1422

Floor Guide (FG)

Used as a guide at floor penetrations. It is attached to the floor by means of four (4) angles. It keeps a
minimum distance between the grease duct or conduit and combustible floor materials.

I.D. O.D. A
in mm in mm in mm
6" to 14" 152 to 356 10" to 18" 254 to 457 5.250 133
16" to 22" 406 to 559 20" to 26" 508 to 660 7.250 184
24" to 32" 610 to 813 30" to 36" 711 to 914 9.250 235
34" to 42" 965 to 1067 38" to 46" 965 to 1168 11.250 286
44" to 48" 1118 to 1219 48" to 52" 1219 to 1321 13.250 337

Guiding Spacer (GS)

Used to guide the grease duct or conduit against the inner wall of the sleeves it passes through. It holds the grease duct or conduit at a distance of 2” (51mm) from the wall firestop (WFS), insulated wall firestop (IFS) or an insulated sleeve (IS).

 
I.D. O.D. A
in mm in mm in mm
6" to 16" 152 to 406 10" to 20" 254 to 508 4.000 102
18" to 36" 457 to 914 22" to 40" 559 to 1016 6.000 152
38" to 48" 965 to 1219 42" to 52" 1067 to 1321 8.000 203